What a paper folding item looks like
A row of small drawings shows a square sheet being folded. A dashed outline marks where the paper used to be, and a solid outline marks the folded paper. The last drawing shows a hole punched through the folded paper. You then choose, from several open squares, the one that shows where the holes really are.
The punch goes through every layer under it. Paper folded once is two layers thick, so one punch makes two holes. Folded twice, it is four layers thick, and one punch makes four holes.
In this site's Classic format the sheet is a grid of 4 by 4 cells, so you can name every hole by row and column. A left fold moves the right half over onto the left half. An up fold moves the bottom half up onto the top half. You choose from four patterns.
Where the format appears
The Dental Admission Test, run by the American Dental Association, has a Perceptual Ability section with six question types. One of them is paper folding. The ADA describes it as a task to mentally unfold a piece of paper that has been folded one or more times and then hole-punched. Its instructions add that the paper is never turned or twisted, that it stays inside the edges of the original square, and that each item has more than one fold.
It is also a standard research task. The Educational Testing Service lists a Paper Folding Test in its Kit of Factor-Referenced Cognitive Tests, 1976 edition, as one of three tests for visualization, beside a Form Board Test and a Surface Development Test. ETS describes the kit as research instruments, not tests for selecting or counselling people.
A 2019 study by Burte and colleagues calls it a frequently used measure of spatial visualization, which the authors define as the ability to imagine and move objects in your mind.
How to solve it: unfold in reverse
Work backwards from the punched stack. Three rules do all the work.
- Open the last fold first. The last fold lies on top of the others, so it is the only one you can open.
- Mirror each hole across the crease you open. A hole one cell from the crease reappears one cell from it on the other side, in the same row or column.
- Each fold you open doubles the holes. In Classic every fold covers all the paper that is left, so one punch and three folds give eight holes.
Before you look at the answers, say how many holes there should be. In Classic every choice has that number, so the count checks your own unfolding rather than ruling out choices. Also check that the punched cell is itself a hole. The top left part of the sheet never moves in these folds, so the first hole stays where you punched it.
One detail catches people. When two folds run the same way, the second crease is not the middle of the sheet. It is the middle of the paper that is left, a quarter of the way across. Example 3 shows it.
Four worked examples
Each example below is a real question from the paper folding practice on this site, drawn by the practice itself. Cover the steps below each one and try it first. In the unfolding drawings, the dashed green line is the crease being opened, and the green holes are the ones that opening has just added.
Example 1: one fold (Easy)
Fold the right half over to the left. Then punch through the cell at row 3, column 2.
Which pattern shows the holes on the open sheet?
Unfold it
The punched stack, with one hole.
Open the fold from drawing 2. Mirror each hole across the crease between columns 2 and 3: one hole becomes two.
The answer is C. The two holes are in row 3, columns 2 and 3. One fold always gives a mirror pair: two holes the same distance from the middle line.
Example 2: two crossing folds (Easy)
Fold the right half over to the left, then the bottom half up. Then punch through the cell at row 1, column 2.
Which pattern shows the holes on the open sheet?
Unfold it
The punched stack, with one hole.
Open the fold from drawing 3. Mirror each hole across the crease between rows 2 and 3: one hole becomes two.
Open the fold from drawing 2. Mirror each hole across the crease between columns 2 and 3: two holes become four.
The answer is B. The four holes are in row 1, columns 2 and 3; row 4, columns 2 and 3. Two crossing folds give four holes, one in each quarter of the sheet, mirrored both ways.
Example 3: two folds the same way (Standard)
Fold the right half over to the left, then the right half over to the left again. Then punch through the cell at row 4, column 1.
Which pattern shows the holes on the open sheet?
Unfold it
The punched stack, with one hole.
Open the fold from drawing 3. Mirror each hole across the crease between columns 1 and 2: one hole becomes two.
Open the fold from drawing 2. Mirror each hole across the crease between columns 2 and 3: two holes become four.
The answer is C. The four holes fill row 4. The first crease you open here is between columns 1 and 2, a quarter of the way across, not the middle of the sheet.
Example 4: three folds (Challenge)
Fold the right half over to the left, then the bottom half up, then the right half over to the left. Then punch through the cell at row 2, column 1.
Which pattern shows the holes on the open sheet?
Unfold it
The punched stack, with one hole.
Open the fold from drawing 4. Mirror each hole across the crease between columns 1 and 2: one hole becomes two.
Open the fold from drawing 3. Mirror each hole across the crease between rows 2 and 3: two holes become four.
Open the fold from drawing 2. Mirror each hole across the crease between columns 2 and 3: four holes become eight.
The answer is C. The eight holes fill rows 2 and 3. Three folds and one punch give eight holes. Every choice here has eight holes, so the count cannot decide it. The mirrors do.
Common mistakes
Mirroring across the wrong crease. In example 3 the paper was folded in half and then in half again. Mirror across the middle line both times, and the second mirror lands on holes you already have: two holes instead of four. A short count means a wrong crease.
Opening the folds in the wrong order. Each crease belongs to the paper as it was at that moment. The last crease in example 4 is a quarter of the way across, and it exists only while the sheet is folded twice. Open it first.
Forgetting a layer. Every layer under the punch gets a hole. The ADA's own sample item makes the same point: its answer has two holes because the paper was two thicknesses when it was punched. If your answer has fewer holes than the doubling rule says, a layer is missing.
Trusting a counting shortcut. Burte and colleagues looked at how people actually answer these items. Most used a single strategy, and simple shortcuts were more common than unfolding. One shortcut assumes each fold adds two holes and multiplies the folds by two. That works for one or two folds, but not for three: example 4 has eight holes, not six.
How to practice it here
Start with the lesson Unfold in reverse order. Its example step has a folded sheet that you open one crease at a time, so you can watch each new hole appear. Then play the paper folding practice. In its Classic format, three levels change the folds, not the rules:
- Easy: one fold, right to left or bottom to top, or two crossing folds. Always one punch.
- Standard: two folds the same way with one punch, or two crossing folds with two punches.
- Challenge: three folds, two one way and one the other, with one punch, or two crossing folds with two punches.
A round is six questions. After each answer, an explanation lists the same unfolding steps as the examples above. There is no time limit unless you choose the two-minute challenge. Leave the timer off until your hole counts come out right before you look at the choices.
When you miss one, redo it on paper: draw a 4 by 4 grid, mark the punch, and open the folds in reverse. The score is the number right out of six. It describes this practice on that day, nothing wider.
The Extended format adds diagonal folds and larger sheets. A fold can then cover only part of the paper, so opening a crease adds holes only where layers lay over the punch. The lesson Unfold through overlapping layers shows how.
Related practices on this site
- Mirror images. The mirroring step on its own: reflect a shape across a line.
- Cube nets. Fold a flat pattern into a cube and find which faces end up opposite.
- Mental rotation. Tell a turned shape from its mirror image.
Questions people ask
What is a paper folding test?
A paper folding test shows a square of paper folded one or more times and then punched. You choose the pattern of holes the sheet would show when it is opened flat. The Dental Admission Test uses this format in its Perceptual Ability section. The Educational Testing Service also lists a Paper Folding Test in its 1976 kit of research tests for visualization.
How do you solve paper folding questions?
Work backwards. Open the last fold first, because it lies on top of the others. Mirror each hole across the crease you open, the same distance away on the other side. Each fold you open doubles the holes. Before you look at the choices, say how many holes there should be, and check that the punched cell is itself a hole.
How many holes are there when the paper is unfolded?
Count the layers under the punch. Paper folded once is two layers thick, so one punch makes two holes. Folded twice, it is four layers thick, so one punch makes four holes. Three folds give eight. This holds when every fold covers all the paper that is left, as it does in the Classic format on this site. The shortcut of two holes per fold fails at three folds.
Is paper folding on the DAT?
Yes. The Dental Admission Test, run by the American Dental Association, has a Perceptual Ability section with six question types, and paper folding is one of them. The ADA instructions say the paper is never turned or twisted, it stays inside the edges of the original square, and each item has more than one fold.
What is the most common mistake on paper folding questions?
Mirroring across the wrong crease. When two folds run the same way, the second crease is not the middle of the sheet. It is the middle of the paper that is left, a quarter of the way across. If you mirror across the middle line both times, you get two holes instead of four. A short count means a wrong crease.
Sources
- American Dental Association (2025). Perceptual Ability Test Section. Instructions and one sample question for each question type.
- Ekstrom, R. B., French, J. W., Harman, H. H. and Dermen, D. (1976). Kit of Factor-Referenced Cognitive Tests. Educational Testing Service. The link goes to ETS's list of the kit's tests.
- Burte, H., Gardony, A. L., Hutton, A. and Taylor, H. A. (2019). Knowing when to fold 'em: problem attributes and strategy differences in the Paper Folding test. Personality and Individual Differences, 146, 171 to 181.