One step at a time
Bend the wire lists directions and lengths, such as Away 2, Left 3. You pick the wire they build. All four wires have the same lengths, so the directions decide.
Use the axes beside the list: Right runs across to the right and a little down, Away runs up to the right, and Up runs straight up. Left and Toward you are their opposites. Start at the dark bead on each wire and follow the first step. A wire whose first segment goes another way is out.
Then take the next step from the end of the first, and so on. Check every step, to the last one: two wires can share all but their final bend.
1Start at the dark bead.
2Follow one step at a time, using the axes.
3Rule out a wire at its first wrong step, and check to the last.
Away 2 · Left 3 · Toward you 1
Three steps, four wires
The list is Away 2, Left 3, Toward you 1. Step 1, Away 2: wires 3 and 4 start Right and Toward you, so they are out.
Step 2, Left 3: wire 1 turns right, so it is out too. Step 3, Toward you 1, fits wire 2, the only wire left.
Which wire?
The list is Away 3, Left 3, Away 3, Left 2. Follow it from the bead on both wires.
Away 3 · Left 3 · Away 3 · Left 2
Try it
Which wire follows these steps?
- Wire 1
- Wire 2
Show the answer
Wire 2
Right. Both wires share the first three steps; only wire 2 ends with Left 2.
Enable JavaScript to answer interactively and save your place.
Practice Bend the wire