Every arm meets an arm
Turn the pipes gives a grid of pipe tiles with a water source in the middle. Water flows only where two pipe ends meet, and the puzzle is done when every tile is wet.
Each board has just enough pipe ends to join every tile, with none to spare. So every arm must meet an arm: no arm can point off the board, and an arm that points at a neighbour needs an arm pointing back.
That makes the corners easy. A bend in a corner fits only one way, facing in. A straight on an edge must run along it. Set those tiles first, then look at their neighbours: an arm from a fixed tile tells the next tile where it must reach.
1Set the corners: a bend faces inward.
2Set the edges: no arm points off the board.
3Let each fixed tile decide its neighbours.
The edge, then the corner
The straight on the right edge points off the board, so it must stand up and down. The bend in the bottom right corner can only face up and left, so its left arm points at the tile beside it.
That bottom tile is a bend on the bottom edge, so it cannot point down. It must point back to the right to meet the corner, and up to meet the tile above. Two turns, and water reaches every tile.
A first-level board
Look at the ringed bend in row 4, column 3, and at the corner beside it.
Try it
Which way must the ringed bend point?
- Up and left, as it is
- Up and right
Show the answer
Up and right
Right. The corner bend can face only up and left, so this tile must reach right to meet it, and on the bottom edge its other arm can only point up.
Enable JavaScript to answer interactively and save your place.
Practice Turn the pipes